I have a ER707-M2 v1.0 WAN connected via PPPoE. This means I cannot define a static WAN IP address. A static WAN IP address is a requirement for One-To-One NAT to be able to use multiple public ip add

Hi, I've setup a 'guest' VLAN (VLAN200) that has no access to VLAN1 but can access internet resources. VLAN1 can access VLAN200 but not the other way around. A webserver in VLAN1 is portmapped from in

I've connected this switch to an OC200 with v5.9.32. There doesn't seem to be an option to set the IP address of the switch to a staic address. On other Omada switches this is possible in the Config t

Hi, I installed a ER707-M2 as our internet router (in Omada env with TL-SG3452X Switch and a couple of EAP620 HD access points). With the previous router I could limit incoming traffic to certain ip g

Latest Firmware Release > Early Access < ER706W/FR365(EU/US) V1_1.1.3 Build 20240830 Beta Firmware (Released on Oct 17th, 2024) > Official Release < ER707-M2 V1_1.2.3 Build 20240822 Official Firmware

Does TP-Link have an Omada ready router/firewall that supports multiple external ip addresses?