Death_MetalLV2Online
Following: 0Followers: 4
Forums/ Switches
By Death_Metal 2024-05-09 15:37:58

Use Non-Omada Gateway to Omada Layer 3 Switch Environment with Zero Omada Config

Hello, this guide should be easily adaptable for even a different Internet Gateway. The steps below is tailored for v14 TL-WR841N and Omada L3 SG3428X Switch for demonstration purpose. I also have a v
Forums/ Switches
By Death_Metal 2024-05-01 01:01:00

DHCP Reservation in a Layer 3 Switching Environment with TP Link Omada Switch

Hey All, The configuration below is to show how to use an Omada Switch as a DHCP Server with DHCP Pools, and DHCP Reservation to support Omada Layer 3 Switch Configuration. I have detailed the steps a
Forums/ Switches
By Death_Metal 2024-04-18 02:23:09

How to Use Switch Static Route to Improve LAN to LAN Traffic and add LAN Redundancy [not LAG or STP]

For Layer 3 Switch that does not support Dynamic Routing, Gateway Static Route can be used to "bridge" them together. One of the benefit of using Gateway to connect independent Layer 3 Switch is simpl
Forums/ Switches
By Death_Metal 2024-03-29 23:40:44

Connecting Multiple Omada Layer 3 Switch via Omada Gateway

Assumption: VLAN 1 is the management VLAN One Gateway Two Layer 3 Switches (Switch A, and Switch B) Layer 3 Switch A, IP x.100 - VLANs 10, 20 Layer 3 Switch B, IP x.200 - VLANs 30, 40 Many of the earl
Forums/ Switches
By Death_Metal 2024-03-22 01:57:25

New Unifi ACL Related Features and How you can do it in Omada

Not sure if many have seen the latest Unifi Release about a week ago but a couple of their ACL features caught my attention. Unifi have new ACL features, specifically L3 Network Isolation and Device I
Forums/ Switches
By Death_Metal 2024-02-22 00:44:35

An alternative to Gateway Stateful ACL using Switch ACL

Hey All, The configuration below is to show an alternative to Stateful Gateway ACL that you can use in your Layer 3 Switching environment (i.e. using Switch for InterVLAN routing). Edit note: There ar