This is related to, but separate from https://community.tp-link.com/en/business/forum/topic/736982 The Omada "Lock to AP" is currently not cleared when the AP the client is locked to is removed from O

The Omada "Lock to AP" should have three options (the first two exist now on/off; the third should be added): 1. don't lock (off) 2. permanent / hard lock (clients will be denied when AP not connected

If you're using the Omada "Lock to AP" function, be aware that when the target AP is not connected the client will be denied completely and be unabe to connect to the WiFi network. TPLink does mention

I have a TL-SG2210P v3.20 Firmware Version: 3.20.9 Build 20230602 Rel.73473. In Omada (4.4.8), it is not reporting which ports are PoE powered. Here is a screenshot of the switch ports: - ports 5 and

I just had a very frustrating experience with the TL-POE10R PoE splitter. I connected it to a PoE switch and attempted to measure the output voltage using a multimeter, but the device simply sat there

Model : Hardware Version : Not Clear Firmware Version : ISP : All, I have two VLANs VLAN 0 - Private ( 192.168.1.0/24 ) VLAN 1 - Guest ( 192.168.2.0/24 ) The EAP110 has an IP in VLAN 0 ( 192.168.1.88