@dgr1 For some reason when the MR600 is in 3g/4g mode it doesnt show the MTU option, if you use a 4g router with bridge mode first then set the MR600 to router mode you can create a profile and the...

@Robynbra Thanks for the reply. I agree with you, i have read on some other sites that the MR600 is a bit crap which is annoying because i associate TP-LINK with quality products. I am assuming that...

Okay so i have used a 4g router i had that does bridge mode and used the mr600 as a wireless router so i have the MTU options available, i have dropped the MTU down to 1372 on the router but im still...

Is this possible on this router ? I have this message constantly repeating and cant get an open nat type. The router in use might not support IP packet fragmentation, and some features of the PS4...

I have an Archer MR600 set up on EE 4g only and have tested it with and without an external antenna. The signal strength seemed to stay the same @75% which i found strange, the only increase i had...

Hi Can anyone tell me how to drop the mtu size on my MR600 ? Its connected via 4g LTE only. I have done some ping tests and 1400 is the biggest i get 100% no loss on but i cant find the setting to...