@Fae Good day Fae, This is what I have done so far: - Tested the EAP245 with the XB6 while the wifi SSIDs are disabled on the XB6. (most I could do as a "router mode", there are not many options in...

Hello everyone, I was wondering if anyone got their EAP245 v3 (or similar) working with the arris or technicolor XB6? I recently changed my internet service because it made sense money wise and I got...

@R1D2 Awesome thanks again!

@R1D2 R1D2 wrote Because the law dictates maximum TX power allowed in each band. In my country it's 20dBm = 100mW for 2.4 GHz, 23dBm = 200mW for the 5 GHz indoor-only channels and up to 30dBm =...

@R1D2 Thank you. I'll see increase my APs to medium and see how they perform. Maybe the way my house is, two EAPs are just oversized as you said. When you say the high on the 2.4ghz is already 4dbm...

@R1D2 R1D2 wrote dBm is a dimensionless unit used for expressing wireless signal strength, see https://en.wikipedia.org/wiki/DBm for an explanation. Usually, signal power is reduced if there are too...