@clydzik Hi, yes, you are right, it should see the channel. .But if you dont have any ax device, and have trouble with it, you can go with b/g/n at 2.4 GHz. When you use same SSID, password and...

@clydzik Hi, if you cant use smart connect, you have to set same SSID and password on 2.4 and 5 GHz. So you can configure the bands like you want and your clients will roam and use the best band for...

@Titmael Hi, have you tried to simple plug it out and in for a few days to see if there is a difference . You can try to reset the switch to factory defaults...

@cakrit Just for Info, i have seen this error and the bugs with 2.4 GHZ. I use mine in Router mode and OneMesh with RE300 but its not my main router. In this config the C6 works without problems and...

@Keneth_C Hi, when you get this frustrating error, can ping an IP , something like 8.8.8.8 ( google DNS) anyway ? If you can do this, there is something wrong with your DHCP or DNS server. Just to be...

Hakki wrote Hello I have the same problem in 2.4G band , can you please upload this firmware again ,the link is dead : Archer C6 EU V2 (Firmware Beta 1.3.6 Build 20201208-rel52296) thank you. @Hakki...