@MDEV The sort answer is yes since Modbus TCP/IP is the the standard Modbus protocol over a TC/IP network on Port 502. The long answer is typically the industrial Etehrnet Switvches will have a...

The TL-SG108E needs to have DHCP enabled under the IP Settings. I do not have this switch so I am guessing that the configuration is under the IP Setting .

@Virgo It was a "PICNIC " error. I misinterpreted the two LED's. They are for the port link status and speed on port 24, which I misinterpreted as the Port Link Status of Ports 23 an 24. PICNIC ERROR...

I am having issues with the Port 23 LED always being on when their is no device connected. The Webpage is properly showing the status of the port. I have tried rebooting the switch but the issue...

Yes, all of the remote switches are directly connected to the T2600G-52TS which is the primary Ethernet Switch. The path costs are low since the SONOS hardware uses are older STP standard. The...

I am attempting to confirm that I have STP properly configured with the following tp-link switches. T2600G-52TS - Primary Switch - CIST Priority = 4096 (SONOS Music Players and Zappiti Media Players)...