The problem has been solved (it was a port issue after all) and the new EAP245 is working great.

I got the new unit today and the problem still persist, so I'm starting to think that there may be a problem on my end (or the entire series is completely broken). The switch that I use shows that...

Yes, I thought about this as well and I made sure that the settings were set correctly, but the problem still persisted. I did run the iperf3 test for a couple of hours and I did notice that from...

Here's a new development: it seems that only the speed from the client to the server is affected, while the other way around, I can easilty get close to 300 Mbps.

I am 100% sure that I connected to the 5GHz network (the 2.4GHz gives me similar numbers). The Security is ste to WPA-PSK and I tried default settings, I tried changing the channels, the channel...

I have recently purchased a TP-Link EAP245 and I decided to test it using iperf3. So I connected the access point to a switch and then the switch to a router and a computer. In my test, the EAP245...