hi revhaken if you followed the quick install guide that asked you to press the wps button, then you will only see the SSID of the main wifi source if you did not do any settings, you just unboxed...

hi fsouza logon to re200's gui and go to "system tools -> password" then change the username and password

Hi some1 On your Fritsbox, is it configured to use port 1194 and not port 80? Once the virtual server setting is already configured to your Fritsbox's IP and its port setting is 1194, you should be...

hi jhackers in case you are using a wireless router and not an access point, try this connect each wireless router on the load balancer's LAN port -each router should have different lan ip (e.g....

Hi Try this Rule2 Source IP : 192.168.0.2 - 192.168.0.52 Rule3 Source IP : 192.168.0.54 - 192.168.0.254 Your previous rule still thinks 192.168.0.53 is still included. Hope this helps.

Hi Chunkers. I don't think that is possible. Once you need to access your home server from a remote location, you can either access it via your WAN1 IP or your WAN2 IP. Just do not forget to port...