R1D2 wrote Does your CPE have two Ethernet ports (not the PoE adapter, this has one PoE out port and a LAN port)? CPE hardware v1 has a second LAN port labeled LAN1 beside LAN0, which is the PoE in...

So alls I need is a 24v passive poe switch and I'm laughing

R1D2 wrote No. This is an 802.3af-conforming PoE injector (48 volts).Why don't you use the 24V passive PoE injector which comes with the CPE?If you have lost it: I will be testing a 24V passive PoE...

Designss wrote Yes I connected the cpe directly to the switch atm I've a patch feeding the uplink of the 4port switch which I'm almost sure is 48v didn't know there was any other type, the internets...

Yes I connected the cpe directly to the switch atm I've a patch feeding the uplink of the 4port switch which I'm almost sure is 48v didn't know there was any other type, the internets on at the...

No luck seems it was nothing to do with any faulty leads think it was the way I wired the poe switch into the cpe, the poe switch is used for sending the Internet to a laptop near by, so I had a...