@Clive_A Below is my network diagram. As you can see this is a controlled test environment. The goal is to setup the ER605 to allow a L2TP connection between PC1 192.168.1.103 and 10.35.0.0/24...

@Clive_A Interestingly enough, if I make the local IP address in the same network as the VPN IP Pool in preferences (172.16.0.19 in my case), the error message is different. In this case I get "The...

@Clive_A Thank you for pointing out my error. I changed the local IP address from 91.68.1.103 to a non conflicting address 172.16.1.100. I tried to connect again and it immediately failed with the...

@Clive_A The WAN address is 192.168.1.108 and the LAN address is 10.35.0.1. There is no conflict between the WAN and LAN address on the router. My connecting Windows client is on the same subnet as...

On the connecting client I verified the following services were running: IKE and AuthIP IPsec Keying Modules IPsec Policy Agent Remote Access Auto Connection Manager Remote Access Connection Manager...

I could not get a L2TP client to lan configuration to work on my ER605. I took it out of service and put it in a test environment to troubleshoot it. I have the following: Local Area network IP...