OK, so the help text for load balancing says: You can configure the traffic sharing mode of the WAN ports to optimize the resource utilization and processing capability of servers. The router will...

@Clive_A Ok, so the routing rules section says it only applies when the connections are online. Why would you not do the same for Load Balancing? Clearly load shouldn't be balanced onto an offline...

@lorengd I have load balancing enabled. However, I didn't have link backup enabled. With Load Balance, Application Optimized Routing, and Bandwidth Based Balance Routing enabled, won't it only send...

@lorengd So, we had a downtime on the SkyWifi again today. I had it configured as you described. However, computer traffic continued to be routed to the down internet connection. What's strange...

I have an ER605 without a controller. It's connected to a SkyWifi SR203 FTTC with Dynamic IP. There's also another internet connection. When the connection to the SR203 goes down, if you connect to...

I am using an ER605 without a controller. My network setup is as follows: WAN: Zyxel FWA710. Setup with Dynamic IP. FWA is setup in IP Passthrough Mode. WAN1: Sky SR203 FTTC. Also setup with Dynamic...