Clive_A wrote Not sure why you are insisting on getting 2.5Gbps. As for now, 900Mbps is the normal speed you should get between them. You have all gigabit devices but only a switch that's 2.5Gbps....

@Clive_A Okay, after a little more digging, I found out that I had enabled the firewall (and forgotten that I had done so) on the server that was directly connected to ER7206. Once that was disabled,...

@Clive_A Okay, I have a server attached directly to the ER7206. I can run iperf from the server out to devices connected both to SG2008 or SG3210XHP. However, I cannot send iperf from devices on...

Yes, slow speed. Yes, I have done fairly extensive iperf testing. I did some testing yesterday. Anything connected to the SG3210XHP-M2 was getting speeds averaging 360-450mb. Today, I attempted...

@Clive_A I have checked the logs and I do not see any issues there.Any other ideas?

@Clive_A Thank you for your response and trying to help me. No, it is not like that. The 2008P and 3210XHP are independently attached to the gateway on different ports, independent from one another....