Why did you configure the DHCP server on the CPE? Disable the DHCP server on AP and Client CPEs are better. You said the CPE is still connected to the AP, so please use your pc to connect to the...

Enable ping watch dog on WBS510. see the screenshot. If doesn't work. tell me more about your network. 1. What is your network topology like? Is it a p2mp network? Including how many CPE clients are...

aditrodostress wrote the problem is about signal. before un traffic signal range 40-45 then if some client browsing or anything (traffic arround 2mbps) signal drop to 15db then disconected i cant...

Do you have any TP-Link products? The primary Fresnel zone is required to be at least 60% clear of any obstruction to ensure the highest performance of wireless link. See pic. 2.4Ghz and 5Ghz both...

1. Can you draw a map about your network topology? Is it a P2P link? 2. You expect 7210 and 5210 to give you connection over 3KM which i think is impossible. This would cause a connection failure....

Setup off the grid power at your own risk!!