Hi @Clive_A no problem, I managed to resolve this via the Technical Support instead. The Support acknowledged that this is indeed a software bug inside the above mentioned switch model. It prevents...

@Clive_A Hi, yes I have a software SDN Controller and deploy my configuration and ACLs thorugh it. The Controller seem to write the ACLs to the switch correctly (I've verified that with CLI on the...

@Clive_A Good Morning :) Yes, exactly. The router VLAN interfaces will be blocked/allowed on the switch according to its switch ACLs (also the VLAN packages are forwarded/trunked correctly). Only the...

Digging deeper into this issue I was able to pin down the problem. I created two new VLANs on my Gateway Router (ER707M2) named 214 and 215. The interfaces were created on the router. Therefore the...

Attention! My switch model is SG3210X-M2 not the "HP" variant selected above. The non-"HP" model can not be selected. Hi! I'm currently trying to set up some Switch ACL rules to block DMZ traffic...