Franz47LV1Online
Following: 0Followers: 0
Forums/ WiFi
2024-09-10 09:20:32
EAP225 ceiling signal geometry when mounting vertically??
I have an EAP225 ceiling positioned horizontally near the ceiling of a room. It meshes with an EAP225 outdoor on about the same horizontal level through two brick walls. How is the geometry of the...
0HELPFULS
Forums/ Accessories
2024-08-21 11:20:12
Re:TL-WPS510U wireless print server - how to change IP-address with a Win 10 or Ubuntu 22.04 computer
@waarner thanks for replying. It would be too easy...Unfortunately, this print server has no LAN interface, only a USB Type B male plug connector and Wireless. I have only cables with USB A and USB B...
0HELPFULS
Forums/ Adapters
2024-05-28 09:27:36
AC600 Dual Band Wi-Fi USB-Adapter driver cannot be uninstalled, probably causes BSOD
Win 10 64 bit 22H2 build 19045.4412 After getting BSODs with the hint DPC_WATCHDOG_VIOLATION and crashing Windows when doing stuff on the Wi-Fi connection and finding info that this often has to do...
0HELPFULS
Forums/ WiFi
2024-05-28 09:07:14
Re:EAP225 outdoor won´t mesh via WiFi in Omada network after having worked - hardware failure?
@Hank21 Thanks for the suggestions. I had configured the Radio - TXPower to High from the beginning. And yes I have updated all 3 APs with the latest firmware 5.1.6 And when I positioned the new...
0HELPFULS
Forums/ WiFi
2024-05-27 19:41:50
Re:EAP225 outdoor won´t mesh via WiFi in Omada network after having worked - hardware failure?
@Franz47 started to work again this afternoon inside the house and meshed via WiFi with one of the other two devices, no idea why. Tomorrow I will transfer it again to the garden and see whether it...
0HELPFULS
Forums/ WiFi
2024-05-27 11:42:44
EAP225 outdoor won´t mesh via WiFi in Omada network after having worked - hardware failure?
Network Until recently: Gateway->cable-> EAP225 indoor -> WLAN -> EAP225 outdoor meshed, with an Omada software controller on a Windows PC. Recently I purchased a second EAP225 outdoor to extend WiFi...
0HELPFULS
12