@NielsS, if you're not currently using any VLANs (other than the default '1') and you're hessitant to add VLANs you can leave ports 25-28 as untagged members of VLAN-1 and attach the the second...

Hi @Defty, Any manual settings made are overwritten when the device is adopted so easier to plug in, adopt and configure. If there are issues adopting, then you may need to update the firmware via...

Hi @raptorq99, It's been a while since using Web UI, but I think you just need to delete the static1 and static2 entries in the DHCP pool config.

@guyd2, just thinking that instead of putting in a PVID, you could just assign a switch profile to define the native vlan (aka PVID) and the tagged members. It looks like tplink moderator didn't...

Hi @jakupo, Your description sounds like you need roaming, not mesh (two different things). You'll just need to deploy the same WLAN group (same SSIDs) to all APs and you should be able to connect to...

@guyd2, it would be better in you could assign the profile exactly like the switch. I just added that as a request/suggestion if you want to up-vote it.