Hi @Mtbbln75, The SG108PE v2 is just POE with a max of 15.4w per port. Newer revisions of this switch are POE+ and supply 30w per port.

@Graham_M, nope not too crazy; my setup is similar. I can overengineer things too, so I put my phone router on it's own VLAN. Putting the Telstra in your IoT VLAN would keep it simple.

Hi @dzakula, It's very odd both would stop working. I'm not aware of any way to just replace the POE part of the AP, but you could always get a few 802.3at POE splitters with the barrel connector.

@stego, FYI, I have oc200 v2.0 running 2.17.6 Build 20241101 Rel.44787. Maybe an oc200 v1 user can chime in.

Hi @127.0.0.2, In general, use the same PVID on both ends of the trunk ports. You don't show the port settings where you device is plugged in, but that should have a PVID set to the VLAN it should...

Hi @Graham_M, VLANs should work accross products that support them. Omada, non-Omada and even products from other manufacturers can all work together. Using Omada supported devices just helps with...