@Houseofdreams_, yes port settings seem correct. "Debugging" a switch? I guess you could try packet captures (not my specialty), but not sure that's necessary. Try assigning a static IP to your...

@snathan, yes, first bullet would assign VLAN-2 to the physical port because something needs to set the VLAN tag to "2" on the packets that come from the server. If your server is able to tag the...

Hi @guyd, You should be able to do dynamic VLAN mapping via RADIUS. Have a look at this article. I think RADIUS support on the oc200 is going away, so plan accordingly.

Hi @snathan, Try this... Server's port: Just needs VLAN 2 untagged (no others) and VLAN 2 as the native network (PVID) Router's port: VLAN 2 needs to be added as tagged Server Config: Be sure the...

@Ugovic, I'm not able to determine if your individual switch is region specific based on the information provided. For an unmanaged switch the only region specific item I'm aware of would be the...

@Houseofdreams_ DHCP services on pfSense are unique to each interface so don't assume it's running on your 10.10.10.x network based on it working on other networks. Most likely it's an issue with the...