@Clive_A Thanks Clive. I did the following test this morning: 1) start tcpdump capture on both ends of the VPN (Linux routers) while video is running 2) restart NVR from web ui 3) While it reboots I...

@Clive_A After doing some troubleshooting here it what I found: 1) Disconnect VPN 2) Verify that IPC appears as Not Connected 3) Reconnect VPN 4) After 5 minutes VPN is back up, IPC still shows as...

@Clive_A Sounds good, I will troubleshoot the VPN connection. Just in case VPN drops and reconnects, should the NVR reconnect with the camera once the tunnel it back up? Thanks,

@Clive_A Thanks for getting back. I confirm the vpn is continuous. In case of interruption, does the NVR try to reconnect to the camera? When i see the camera is disconnected from the NVR, if i go to...

I have the following NVR VIGI NVR1016H(UN) 1.0 Firmware Version 1.1.0 Build 240507 Rel.77310n There are 2 Hikvision cameras NVR connects to over VPN (different network to where the NVR is), and it...

@Clive_A Yes, I mean that when you are in the Web UI and you have 16 views, as you start adding them you hit a "bandwidth limit". When using the Vigi Mobile App, I can see all 16 channels at once. On...