JoeSea wrote @ErwinvL For trouble shooting, you could try to direct connect one of the APs to the router box, and see if the VLANs carry through that simple config. You could also try setting an open...

PS. the same SSID are also set on the 5Ghz channels and both EAP's have the same setup.

Somnus wrote @ErwinvL Maybe it's the switch or the router VLAN settings not match? Try set up a port on the switch to "Guest" VLAN untag(with PVID 7), and connect PC to this port and test if it can...

JoeSea wrote @ErwinvL Assuming the APs are on ports 2 & 3 and the router is on port 17, are the switch PVID of those three ports set to 1? They should be, to be consistent with VLAN1 being the...

I have 2 EAP245 access point each configured with 6 SSID's per channel. Each AP has one SSID not associated with a vlan, and thus untagged, and 5 SSID's that are tagged. The strange thing is that...