@KJK I'm using Firewalla Gold for my router/firewall. They don't have a setting for tagged/untagged on their ports. All ports are effectively tagged, so it appears I'll have to leave the trunk port...

Hi Kris, I untagged port 1 and my Home VLAN died. No connectivity via the switch ports to the internet or the switch. Used the config tool to attach from the guest WiFi. Tagged the port again and...

KJK wrote @TP_Shortage Try, Port 1 UNTAGGED in VLAN10 (Home), PVID=10, TAGGED in the other VLANs. The port on the router on the other side of the cable should be configured the same way. However, it...

Hi All, I've configured the TL-SG108E I recently purchased with 4 VLANs and all appears to be working well. I have a VLAN for Home, IoT, Guest and Work. All are up and running. I just discovered my...

I got it sorted out. it was a combination of not blatantly defining my AP as being managed by mny new Home VLAN (It would switch to default and end up on a defferent network and IP). New Home VLAN...

@TP_Shortage VLANs 40 and 60 are going to be wireless only. They need to be assigned to ports 1 (trunk) and 2 (access point). Ports 3 & 4 are going to be exclusive to work systems and 5-8 for NAS and...