XammoLV1Online
Following: 0Followers: 0
Forums/ Routers
2023-01-14 22:34:26
Re:ER605 v2 Firmware update 2.1.0 causes adopting loop
Also just to add I've recently started running an E3372 USB Modem as a second WAN on the ER605 if that might possibly have anything to do with anything Other than constantly getting disconnected from...
0HELPFULS
Forums/ Routers
2023-01-14 22:21:13
Re:ER605 v2 Firmware update 2.1.0 causes adopting loop
I don't have any reservations as I have my DHCP range set 192.168.0.21 - 192.168.0.254 All Omada devices are static IP'd ER605 - 192.168.0.1 OC200 - 192.168.0.2 TL-SG2210P - 192.168.0.3 Then all the...
0HELPFULS
Forums/ Routers
2023-01-14 21:03:13
Re:ER605 v2 Firmware update 2.1.0 causes adopting loop
Well that was fun (not)... Yeh I was thinking that was what I needed to do but not having any device capable of being hard cabled in and working off the WiFi was more my concern but yeh static ip'd...
3HELPFULS
Forums/ Routers
2023-01-14 20:02:29
Re:ER605 v2 Firmware update 2.1.0 causes adopting loop
Can't send the firmware to the ER605 it only gets to about 4% (is only a 13MB file don't know why it is going so slow) but after about 15 seconds it loses connection and starts adopting so the upload...
2HELPFULS
Forums/ Routers
2023-01-14 19:31:12
Re:ER605 v2 Firmware update 2.1.0 causes adopting loop
Doh of course! The actual product page... now I feel dumb... I've been keeping half an eye on these forums last few months since installing the whole Omada setup and the firmware going ons/beta...
0HELPFULS
Forums/ Routers
2023-01-14 19:18:30
Re:ER605 v2 Firmware update 2.1.0 causes adopting loop
Same issue :( any hints on where to get the previous firmware please? Am scanning the pinned firmware post but not immediately seeing 2.0.1 as rgentleman above said they've gone back to (looks like...
0HELPFULS
12