EnderXainLV1Online
Following: 0Followers: 0
Forums/ Controllers
2022-05-31 22:30:35
Re:TP Link ER605 initial config with ONT
@Philbert I got it to work after calling them. They do DHCP leases so my router's MAC didn't match anything they had of course but beyond that they also only allow it in one port on the ONT device....
0HELPFULS
Forums/ Controllers
2022-05-30 22:06:25
Re:TP Link ER605 initial config with ONT
@Philbert I saw that but above it is a radio check for not using a login. I'll give them a call. I just didn't wanna call them until I knew what I was looking for. I was wondering if I'd need PPPOE...
0HELPFULS
Forums/ Controllers
2022-05-30 20:26:07
Re:TP Link ER605 initial config with ONT
@Philbert The Orbi is set to dynamic but underneath that radio select are greyed out entries for IP and such. I'll provide a censored image. IF it is using that greyed out info, it is getting a...
0HELPFULS
Forums/ Controllers
2022-05-30 14:38:40
Re:TP Link ER605 initial config with ONT
@Philbert It has nothing under the WAN section and it says link down. Yes I have been in this menu. Wan port is checked, online detection is custom at 10 seconds. WAN connection type is set to...
0HELPFULS
Forums/ Controllers
2022-05-30 14:05:15
Re:TP Link ER605 initial config with ONT
@Philbert The Orbi does not require a login. I just checked. And the laptop running the Amanda software has 192.168.0.100 255.255.255.0 192.268.0.1
0HELPFULS
Forums/ Controllers
2022-05-30 13:36:20
Re:TP Link ER605 initial config with ONT
@Philbert I was wondering this but my brother is the one who bought and set up the Orbi router and I do not think it is PPPOE.
0HELPFULS
12