Forums/
Switches
2023-12-10 23:44:16
@xrioann Check PVIDs on all ports. Make sure they are configured with the ID of the VLAN the port is untagged in. Also, restart the switches to clear their dynamic tables.
0HELPFULS
Forums/
WiFi
2023-12-10 03:36:23
@Tomas1974 Wouldn't disabling the Mesh function do the job?
0HELPFULS
Forums/
Controllers
2023-12-09 18:48:08
@ceejaybassist You don’t need any static route for it. The 10.0.0.x network is a remote network for the 192.168.10.x network. Therefore, the default route in the 192.168.10.x network already takes...
0HELPFULS
Forums/
Routers
2023-12-08 16:02:52
@CCDan IP-MAC binding? DHCP scopes? Fixed IP addresses?
1HELPFULS
Forums/
WiFi
2023-12-08 15:50:31
@Athena4537 "Port configuration on switches : Trunk ; 1 Untagged ; 10 Tagged" "SSID (VLAN 1)" Remove the VLAN 1 setting from the SSID. The port with PVID=1 and untagged in VLAN 1 will do the job of...
1HELPFULS
Forums/
WiFi
2023-12-08 15:40:17
@Pietr-o “Port 5: PVID 1” That’s not going to work. You have VLAN-unaware devices and you want them to be in VLAN 50. The PVID needs to be 50 and the port untagged in VLAN 50. “Even if I set back the...
0HELPFULS