@Hank21 Well, I didn't make any changes to the internet side. I noticed this when performing a f/w update to a switch that is not in the path of AP<-->OC200. All was going well & seemed stable, but...

@Hank21 5.1.1 did fine and experienced no lockups. I took them all back up to 5.1.6 and have had 2 APs experience a lockup, but nothing over the last 24 hours. Hopefully things are starting to...

@d0ugmac1 Well, it seems to have helped, but hasn't completely resolved the issue. After a couple of days with no issues, I returned everything to 5.1.6, and now it seems like every 12 hours one of...

@Hank21 The OC200 is running 5.14.26.23 -- latest available for the hardware. The APs are all powered by PoE and have been for years, just in standalone until I recently brought them into a...

I have run 3 EAP225s in my setup for several years with no real issues. I finally decided to go further with Omada and deployed an OC200 & adopted the APs in (factory reset, then adopt & configure)....

@Antoni777 Unfortunately in my case, I'm getting the issue even without using a controller at all. I just have the APs in standalone mode. It seems that most devices in my setup (a lot of Apple gear,...