@GRL this was example, pleas multiply all 3x for servers and 7x for clients, other services multiply 3x. I cant you send you my whole network :), IP adresses, MAC adresses. I wrote only examle.

@GRL lan subnet: 192.168.0.0/24 example: servergroup1 server1 - 192.168.0.10 server2 - 192.168.0.20 server3 - 192.168.0.30 server4 - 192.168.0.40 servergroup2 server50 - 192.168.0.50 server60 -...

@MR.S I start communication with support over email. But, this not solve my problem. I think, that will end with "maybe in some next release.....". So i will see. For now, OMADA is useles for more...

@MR.S yes, that is limitation. An it is limitation if you have for example 1 x 24port switch, so also for SMALL, VERY SMALL networks. So THIS IS THE problem, 8/8 or 16. And also VLAN drop is...

@GRL Also, i wil re-iterate - vlans do not effect switch performance at all. they are designed for it - so i tested on 3 PC, bese network setup and TP-link exact steb-by-step documentation. AND, i...

@GRL "routing" on same subnet is on switches. That is why i want use ACL as second solution and not VLANs (that was first solution i want use). I use many (10 more) 10Gb SFP+ servers, so router cand...