crrodriguezLV3Online
Following: 0Followers: 1
Forums/ Switches
2023-06-06 22:02:45
Re:TL-SG3210 SFP port
@trigg3r both ends need - in general - to link at the same speed. while sfp+ devices usually work fine in sfp slots at 1gig.. I suggest you ask the vendor if they do gigabit just to be absolutely...
0HELPFULS
Forums/ Switches
2023-06-05 21:01:26
Re:TL-SG3210 SFP port
@trigg3r yes, you need to buy a gigabit ethernet SFP transceiver. Now, should you ? No, you shouldn't. if the device you want to connect on the other side is less than 7 meters away. use a passive...
0HELPFULS
Forums/ Switches
2023-06-05 16:40:51
Re:LAN dropping to 100Mbps from 1000 with TL-SG108E
@jra11500 Yes, the cheapest way is to replace all cables and jacks.
0HELPFULS
Forums/ Switches
2023-06-05 14:54:25
Re:LAN dropping to 100Mbps from 1000 with TL-SG108E
@jra11500 this usually means there is indeed some trouble in the cabling..I suggest you, since they are extremely expensive, to RENT a cable certifier (rather than a tester) Fluke CableIQ or LinkIQ...
1HELPFULS
Forums/ Controllers
2023-06-04 14:41:08
Re:Separate DHCP IP range for VLAN?
That's the standard if you create a network instead of a vlan.. what is exactly your issue ? ps: Never use this network ranges, instead pick one from 172.16.0.0/12 for example the 192.168.100.x range...
0HELPFULS
Forums/ Requests & Suggestions
2023-06-03 13:06:46
SFP WAN of GATEWAY is down - precise meaning needed
Hi: In my installation when the SFP WAN connection fails the following messages show in the controller (error icon) [SFP WAN] of GW-CORE is down. (info icon) [Failed]GW-CORE: PPPoE user@domain failed...
0HELPFULS
1567...