I've seen the UK TP Link website is getting ready for a new hardware version V2 of the ER7212PC, including the spec sheet: https://support.omadanetworks.com/uk/document/23413/ Twice as much storage...

@SKL50 Is this because the port that your wired client is on (port 5 with PVID 20) is not enabled in VLAN 10 "Network A"? I guess your Network A configuration should look something like this:

The controller offered me firmware 1.3.1 in its stable channel, with helpful release notes in the UI too. Latency, TX rate and RX rate numbers and units are good now as noted, and the router serial...

It is probably not your problem, but you have created a very very large DHCP pool of IP numbers for your IoT LAN (172.16.0.1/16). Would 172.16.1.1/24 (253 IP addresses) be a more appropriate size for...

Yes - it's hard to identify what clients have a lock to AP configuration. I am working around this by adding Dhcp reservations for all locked clients with a -lockap suffix added to the client user...

I am also behind a CG-NAT for ipv4 and have a public ipv6 subnet.