Forums/
Switches
2023-03-13 17:59:55
@h3llfire The SG3428X can be stressful sometimes, especially when adopting to Omada for the first time or after firmware updates. First of all, please confirm that you get a slowly blinking status...
0HELPFULS
Forums/
Switches
2023-02-06 20:50:15
@kogan Yes, I did. I also tried an SG108PE. The problem stays the same. TP-Link seems to block something. Martin
0HELPFULS
Forums/
Switches
2023-02-06 13:10:10
@Cooger36 Yes, that's just a modem. You can connect one single PC to it, if you wish because you will get only one IP address from your provider. If you want to provide internet for more than one...
0HELPFULS
Forums/
Switches
2023-02-05 17:16:01
Hi. I used to run a Swissvoice CP2505G VOIP phone directly connected to a FritzBox 7490. The setup worked fine. To power the phone via POE I placed the SG2008P in between. Since then, the phone only...
0HELPFULS
Forums/
Switches
2023-02-05 16:55:12
@Cooger36 Some more information would be helpful, e.g. which cable modem do you use. In general: Yes, there must be a router between your LAN/Switch and the modem. But most consumer hardware usually...
0HELPFULS
Forums/
Controllers
2023-01-15 18:06:29
Hi. Having a look at the switch statistics I found some strange information regarding the user count. The switch is a SG2218. There are two Hyper-V servers connected, one hosting two VMs one hosting...
0HELPFULS