Hi, I have an OC200 and a couple of APs. Years ago I set up a reboot schedule, to reboot the APs every night. I want to change that, but I can't find how to. Since I set up the schedule initially,...

Hi @Fae , After digging through some logs, I noticed that the NAS (on which the Omada controller software is running inside a Docker container) logged about the network cable bing plugged in and out...

Hi @Fae, Tanks for your reply. Yes, I do use the supplied PoE adapters. And both EAPs are hard wired to my network with ethernet cables. I have changed the LED to be on and Mesh to be off. The IP...

Hi @Fae , This morning, the same problem occurred again. So I guess it's safe to say that it is not magically solved by upgrading the controller to 4.2.8. Can you help me solving it? Let me know if...

Hi @Fae , Thanks for your reply. I've upgraded the controller to 4.2.8, that should be the latest version at the moment. Let's see if the problem occurs again. I'll update this post once it does....

@bkummel And here's the other part of the config backup.