TP LINK TL-WA7210N (Problem connect)
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
TP LINK TL-WA7210N (Problem connect)
Model :
Hardware Version :
Firmware Version :
ISP :
Good morning. Yesterday morning I got this antenna bought on Amazon.
I connected the antenna on the PC, I entered the Configure page and I set it in client mode.
When I did scan the networks, my network was 45 DBI power, however when I set the password and the TP link TL-WA7210N It restarts, the power drops to 4 dbi and therefore does not connect. The modem in question is a TP-link.
The LEDs light up, and signal the maximum power, but it does not connect.
After a few seconds the LEDs drop to 1. You give me some explanation?
Hardware Version :
Firmware Version :
ISP :
Good morning. Yesterday morning I got this antenna bought on Amazon.
I connected the antenna on the PC, I entered the Configure page and I set it in client mode.
When I did scan the networks, my network was 45 DBI power, however when I set the password and the TP link TL-WA7210N It restarts, the power drops to 4 dbi and therefore does not connect. The modem in question is a TP-link.
The LEDs light up, and signal the maximum power, but it does not connect.
After a few seconds the LEDs drop to 1. You give me some explanation?
