How to connect a TL-WA7210N in AP mode to a TL-WA7510N
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
How to connect a TL-WA7210N in AP mode to a TL-WA7510N
Model :
Hardware Version : Not Clear
Firmware Version :
ISP :
Hi
I have a long area cover with your antennas in order to extend our LAN, we just bought a TL-WA7510N and we need to connect this antenna to a TL-WA7210N, the problem is in the 7210 i have different modes (b only, g only, n only, bgn mixed, etc.) but none of tese modes match the 7520's modes (11n ht20 y 11n ht40).
The 7210 is in AP mode because it is connected already and in production with another 7210 that is in Bridge with AP mode.
My 7210 is working in n only channel 6 with 20Mhz, in what mode and channel should i put the 7510 so it can comunicate with the 7510, channels in the 7510 do not match those in the 7210.
Thanks in advance.
Hardware Version : Not Clear
Firmware Version :
ISP :
Hi
I have a long area cover with your antennas in order to extend our LAN, we just bought a TL-WA7510N and we need to connect this antenna to a TL-WA7210N, the problem is in the 7210 i have different modes (b only, g only, n only, bgn mixed, etc.) but none of tese modes match the 7520's modes (11n ht20 y 11n ht40).
The 7210 is in AP mode because it is connected already and in production with another 7210 that is in Bridge with AP mode.
My 7210 is working in n only channel 6 with 20Mhz, in what mode and channel should i put the 7510 so it can comunicate with the 7510, channels in the 7510 do not match those in the 7210.
Thanks in advance.
