EAP 220 not showing up in controller
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.EAP 220 not showing up in controller
Posts: 2
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2017-03-10
2017-03-10 23:56:39
Posts: 2
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2017-03-10
EAP 220 not showing up in controller
2017-03-10 23:56:39
Tags:
Model : EAP220
Hardware Version : Not Clear
Firmware Version :
ISP : Online.nl
I am setting up a EAP220 for the first time: lan kabel from my router goes tp the ethernet port of the EAP220, power is on, laptop is connected to the SAME router, EAP Controller 2.4.7 installed, When I get to the main screen, I click on the ACCESS POINTS tab, but none shows up: no pending AP... Tried pressing the reset button on the AP, tried rebooting my laptop but to no avail... No antivirus can be blocking. Also tried the EAP Discover tool, no AP found either. What am I doing wrong???
Hardware Version : Not Clear
Firmware Version :
ISP : Online.nl
I am setting up a EAP220 for the first time: lan kabel from my router goes tp the ethernet port of the EAP220, power is on, laptop is connected to the SAME router, EAP Controller 2.4.7 installed, When I get to the main screen, I click on the ACCESS POINTS tab, but none shows up: no pending AP... Tried pressing the reset button on the AP, tried rebooting my laptop but to no avail... No antivirus can be blocking. Also tried the EAP Discover tool, no AP found either. What am I doing wrong???
#1
Options
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Thread Manage
Announcement Manage
7 Reply
Posts: 2
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2017-03-10
EAP220 not accepting IP address assigned by DHCP
2017-03-11 02:01:09
Model : EAP220
Hardware Version : Not Clear
Firmware Version : 2.0.3
ISP : Online.nl
I have 3 EAP220 aps. Two of them adopted beautifully, but 1 does not. In the EAP controller I see that the two that adopted normally, got IP addresses in the 192.168.1.XXX range (which is the range that my router hands out), but the one that won't get adopted has 192.168.0.254 (which turns out to be it's fallback IP address). If i force my ethernetcard to use .0.XXX then I can access the AP via webinterface, that works fine. I have updated the AP to 2.0.3 (latest firmware), but that didnt help. I tried resetting the AP with the reset butoon on the back, but same story. Is it possible this particular AP is broken right out of the box, or am I missing something?
Any help would be greatly appreciated!
Abbe
Hardware Version : Not Clear
Firmware Version : 2.0.3
ISP : Online.nl
I have 3 EAP220 aps. Two of them adopted beautifully, but 1 does not. In the EAP controller I see that the two that adopted normally, got IP addresses in the 192.168.1.XXX range (which is the range that my router hands out), but the one that won't get adopted has 192.168.0.254 (which turns out to be it's fallback IP address). If i force my ethernetcard to use .0.XXX then I can access the AP via webinterface, that works fine. I have updated the AP to 2.0.3 (latest firmware), but that didnt help. I tried resetting the AP with the reset butoon on the back, but same story. Is it possible this particular AP is broken right out of the box, or am I missing something?
Any help would be greatly appreciated!
Abbe
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#2
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 4334
Helpful: 1046
Solutions: 173
Stories: 3
Registered: 2015-12-05
Re:EAP 220 not showing up in controller
2017-03-13 05:46:14
What happens if you set an otherwise unused static IP from the 192.168.1.0 subnet on the third EAP?
༺ 0100 1101 0010 10ཏ1 0010 0110 1010 1110 ༻
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#3
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 4334
Helpful: 1046
Solutions: 173
Stories: 3
Registered: 2015-12-05
Re:EAP 220 not showing up in controller
2017-03-13 05:49:24
In order for the discovery tool to work, your PC must be set to an IP in the 192.168.0.0 subnet. Please RTFM if this is your first EAP you set up.
༺ 0100 1101 0010 10ཏ1 0010 0110 1010 1110 ༻
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#4
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 5
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2017-03-14
Re:EAP 220 not showing up in controller
2017-03-14 18:37:49
I have the same problem with a EAP 225 (already posted my own topic, but that needs to be approved before it shows up, wonder if you got this fixed so I can try that too.)
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#5
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 5
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2017-03-14
Re:EAP 220 not showing up in controller
2017-03-15 18:34:49
In my router's settings I went to DHCP settings and clicked "force available" for the MAC address of the EAP.
It then showed up in the Connector and it's adopted and listed as Connected now.
It then showed up in the Connector and it's adopted and listed as Connected now.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#6
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 4334
Helpful: 1046
Solutions: 173
Stories: 3
Registered: 2015-12-05
Re:EAP 220 not showing up in controller
2017-03-16 16:48:03
dean0048 wrote
In my router's settings I went to DHCP settings and clicked "force available" for the MAC address of the EAP.
This creates a static DHCP lease. I'm old-school and never would use DHCP for stationary devices such as APs, routers, switches, PCs, servers. DHCP is useful for mobile devices only and static DHCP leases create an unnecessary dependency in the router running the DHCP server.
༺ 0100 1101 0010 10ཏ1 0010 0110 1010 1110 ༻
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#7
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 5
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2017-03-14
Re:EAP 220 not showing up in controller
2017-03-17 17:35:19
Oh... I just clicked around until something worked.
I've got the new wifi adapter (and everything is working well) -- will see if I can undo the static lease and see if the EAP shows up now without one.. Thanks!
I've got the new wifi adapter (and everything is working well) -- will see if I can undo the static lease and see if the EAP shows up now without one.. Thanks!
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#8
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 2
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2017-03-10
2017-03-10 23:56:39
Posts: 2
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2017-03-10
Information
Helpful: 0
Views: 1769
Replies: 7
Voters 0
No one has voted for it yet.
Tags
Related Articles
EAP 220 Speeds
718
0
EAP 220 Cluster
1269
0
EAP 220 Cluster
910
0
EAP 220 Ethernet Problem
1024
0
Report Inappropriate Content
Transfer Module
New message