TL-ER6020 v1.0 configuration issues

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

TL-ER6020 v1.0 configuration issues

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
TL-ER6020 v1.0 configuration issues
TL-ER6020 v1.0 configuration issues
2016-02-13 04:57:50 - last edited 2021-04-19 11:37:02
Model :

Hardware Version : Not Clear

Firmware Version :

ISP :

Hi,

I have a TL-ER6020 V1.0 running firmware 1.1.0 Build 20150406 Rel. 35252.

I have two issues:

Firstly, online detection does not seem to be working properly as I'd expect. Right now, both WAN connections say they are up according to the status page. However, one of the WANs has no connectvitiy. Online detection states previously stated "Online detection failed" and just now changed to "Failed to get the network parameters". However the router does not disconnect/reconnect the PPPOE connection on that port.

My guess is that enabling a timeout value on the PPPOE connections might force the router to drop a PPPOE session once connectivity is lost. Am I right, or is there another way to implement this?

If that is what I should do, my second issue is that I can't edit WAN settings. It seems that as soon as I changed the router's ip from default to 10.0.1.1, the WAN configuration pages broke. Now instead of saying 'saved' when I click save, the page reloads and saves no changes. I've tried IE,Chrome and FF on Linux and Windows. I reproduced this 3 times with factory resets of the router in between each trial. In the end I had to set up the WAN before the LAN to work around this issue.

Thanks,
Ian
  0      
  0      
#1
Options
2 Reply
Re:TL-ER6020 v1.0 configuration issues
2016-03-02 09:20:55 - last edited 2021-04-19 11:37:02
For your first question, how do you configure the Online Detection? Automatically or Manually? If you set it Automatically, the router will ping the WAN IP and look up the DNS of the WAN. If this failed, please try to set it Manually, to designate a IP address for the Ping and Nslookup.

For your second question, you mean you must set up the WAN configuration before you want to change the LAN IP address to 10.0.1.1, right? If so, I will say it is really strange.
  0  
  0  
#2
Options
Re:TL-ER6020 v1.0 configuration issues
2020-01-05 13:58:22 - last edited 2021-04-19 11:37:02

@jery I have noticed that although the WAN dectection is on manual or automatic once it dectects it offline it never detects when the like back online and thats the problem with this online wan dection.

  0  
  0  
#3
Options

Information

Helpful: 0

Views: 1065

Replies: 2

Related Articles