Business Community > All Threads > Can't find any wireless clients
< All Threads

Can't find any wireless clients

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Can't find any wireless clients

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Can't find any wireless clients
Can't find any wireless clients
2015-03-29 21:31:30
Region : UnitedKingdom

Model : CPE510

Hardware Version :

Firmware Version :

ISP :

We have just installed 2 TP link outdoor cpe510's 1 on side of house connected to router (AP which is enabled )the other is attached to my stables approx 150m from house to run cameras When I search for clients I can't find any there is nothing in between so should be direct line of sight although the one on stables is lower as we are on a sloping site.Any ideas got a mare foaling very soon and need cameras working
  0      
 
  0      
 
#1
Options
4 Reply
Re:Can't find any wireless clients
2015-03-30 16:45:00
Just watch the Pictures and set the setting as in the image.
This is for your home AP.



Now the Second CPE510 as Client mode at your stable.

  0  
  0  
#2
Options
Re:Can't find any wireless clients
2015-03-31 01:03:20
@Siddhant001 I dont know the 5.8 Ghz. rules in UK but in America we avoid DFS channels, cause the devices will vacate that channel and switch to an alternate channel automatically.
read here http://forum.tp-link.com/showthread.php?78953-Brief-introduction-of-DFS-function
if the case, correct the screen shot, if not then it will be my day lesson
  0  
  0  
#3
Options
Re:Can't find any wireless clients
2015-03-31 11:25:17
OK i corrected it now.
Select your region to United Kingdom
And remove tick from DFS option.




Now do the setting in you second AP as client


Note if you enable MAXtream in your AP, only TP-LINK CPE510 is able to connect to your AP(Only PHAROS)
  0  
  0  
#4
Options
Re:Can't find any wireless clients
2015-03-31 11:28:17
Then check from your client that your are connected to the AP and are you able to access the AP GUI.Then go to your AP Settings.
Before making these settings reset your both CPE510.
  0  
  0  
#5
Options

Information

Helpful: 0

Views: 762

Replies: 4

Related Articles
Can't find EAPs unless I wireless connect to them
534 0
Open VPN can't see wireless clients
425 0
Wireless clients appears as wired
462 0
Can't find T1600G-28PS
713 0
Wireless Icons on clients section what do they stand for
1248 0
Wireless Clients showing as Wired in SDN
7509 3
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.