Can't find T1600G-28PS

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Can't find T1600G-28PS

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Can't find T1600G-28PS
Can't find T1600G-28PS
2021-06-30 07:50:21
Hardware Version:
Firmware Version:

Hi,

 

In one of ur network we are using a T1600G-28PS and in order to change VLANs in his configuration we need to access it one way or the other (web, SSH or Telnet).

We are using this switch for a lot of time and I don't actually know his IP address. I scanned several times the LAN using nmap and didn't find the device.

The device is present in the LAN 192.168.10.0/24, I also scanned the two LANs 192.168.0.0/24 and 192.168.1.0/24 to check if i didn't switch to a standalone IP but without success. I also checked for DHCP leases and ARP table in the pfSense responsible of the subnet.

 

A photo of the switch;

 

Best regards.

  0      
  0      
#1
Options
2 Reply
Re:Can't find T1600G-28PS
2021-07-01 07:13:23

@Dreyden 

I don't think there is a way to figure out its IP address when it's using a static IP.

The only way to configure the Switch again is to reset it and use the default 192.168.0.1.

 

Just striving to develop myself while helping others.
  0  
  0  
#2
Options
Re:Can't find T1600G-28PS
2021-07-01 09:11:49
The goal here is to avoid if possible to reset the device.
  0  
  0  
#3
Options

Information

Helpful: 0

Views: 733

Replies: 2

Related Articles