Wireless connected client via EAP is tag as wired in the network
The issue of tagging wireless connected client is tagged as wired connection, even if the client is connected thru EAP antenna. Is it a glitch issue in the device?
Can we solve it thru firmware update? If the client is connected to a wireless network then it should be under wireless network tag.
This is my topology:
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi @infosecX
What kind of the client the 192.168.0.17 is?
Which EAP is it connecting to?
Do the two EAPs plug directly into the router or via a third-party switch?
Does this issue only happens on the client 192.168.0.17?
Please try disconnecting the client and reconnecting it. Sometimes it's caused by some unknow wrong cache.
- Copy Link
- Report Inappropriate Content
Hi @infosecX
What kind of the client the 192.168.0.17 is?
Which EAP is it connecting to?
Do the two EAPs plug directly into the router or via a third-party switch?
Does this issue only happens on the client 192.168.0.17?
Please try disconnecting the client and reconnecting it. Sometimes it's caused by some unknow wrong cache.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 125
Replies: 1
Voters 0
No one has voted for it yet.