Business Community > All Threads > Can EAP be connected through the controller?
< All Threads

Can EAP be connected through the controller?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Can EAP be connected through the controller?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Can EAP be connected through the controller?
Can EAP be connected through the controller?
2022-06-06 20:48:53 - last edited 2022-06-10 06:03:50
Tags: #Highlighted Thread
Model: OC200  
Hardware Version:
Firmware Version:

Having a normal configuration:

 

Router --- Switch --- EAPs

                      |

               Controller

 

  1. Can I still connect an EAP and / or client as a dowstream AP of the controller using the free ethernet port? Or it can be done only directly via the switch or via other EAPs?
  2. Are there any TP Link controllers with Downstream / Passthrough PoE?
  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:Can EAP be connected through the controller?-Solution
2022-06-07 02:25:52 - last edited 2022-06-07 23:07:40

  @AvidLearner 

 

So no, not yet to the downstream POE question of controllers.

 

Also the ports of the the OC200 at least are only 100M, which may be less than some of your APs are capable of.  The 2-port OC200 is literally a pass-through L2 switch, so any Switch magic like ACLs and/or VLANs would apply to both ports as they are essentially unmanaged by the Omada solution.

<< Paying it forward, one juicy problem at a time... >>
Recommended Solution
  2  
  2  
#2
Options
2 Reply
Re:Can EAP be connected through the controller?-Solution
2022-06-07 02:25:52 - last edited 2022-06-07 23:07:40

  @AvidLearner 

 

So no, not yet to the downstream POE question of controllers.

 

Also the ports of the the OC200 at least are only 100M, which may be less than some of your APs are capable of.  The 2-port OC200 is literally a pass-through L2 switch, so any Switch magic like ACLs and/or VLANs would apply to both ports as they are essentially unmanaged by the Omada solution.

<< Paying it forward, one juicy problem at a time... >>
Recommended Solution
  2  
  2  
#2
Options
Re:Can EAP be connected through the controller?
2022-06-07 15:16:29 - last edited 2022-06-07 15:17:27

  @d0ugmac1 Thanks for the reply and the clarification of the functionality. And good point about the bandwith of those ports anyway!

  0  
  0  
#3
Options

Information

Helpful: 0

Views: 661

Replies: 2

Tags

Highlighted Thread
Related Articles
2x EAP AP, with or without controller?
19075 1
EAP Controller
1533 0
EAP Controller does not display connected clients
616 0
Clients not showing up with EAP connected on same switch
4486 0
Eap controller
1115 0
Devices showing as "Connected" in the controller client list, but have been disconnected for hours
1959 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.