ER605 - WAN uptime monitor

ER605 - WAN uptime monitor

ER605 - WAN uptime monitor
ER605 - WAN uptime monitor
2024-06-07 13:20:14 - last edited 2024-06-11 01:48:08
Model: ER605 (TL-R605)  
Hardware Version: V2
Firmware Version: 2.1.2 Build 20230210 Rel.62992

Hi,

I just bought and installed the ER-605 and did quick setup with 2 Wan.

I would like to know if there is a feature to monitor monthly based the uptime of each wan signal?

I have plan to change one of my providers. So, I would like to have this information in order to make a better decision.

PS: There is any major fix/feature over new firmware versions? Is mandatory to update? If so, which one is the latest, most stable, version?

Really appreciate,

 

  0      
  0      
#1
Options
1 Accepted Solution
Re:ER605 - WAN uptime monitor-Solution
2024-06-08 03:43:55 - last edited 2024-06-11 01:48:08

Hi  @ricardoff5

There is a log system. But don't have a dedicated interface to monitor the WAN uptime or show you the graph.

In the controller mode, the graph is mainly about the traffic consumption. You might consider other stuff like SNMP to monitor this via the protocols.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update!Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
Recommended Solution
  2  
  2  
#2
Options
1 Reply
Re:ER605 - WAN uptime monitor-Solution
2024-06-08 03:43:55 - last edited 2024-06-11 01:48:08

Hi  @ricardoff5

There is a log system. But don't have a dedicated interface to monitor the WAN uptime or show you the graph.

In the controller mode, the graph is mainly about the traffic consumption. You might consider other stuff like SNMP to monitor this via the protocols.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update!Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
Recommended Solution
  2  
  2  
#2
Options

Information

Helpful: 0

Views: 322

Replies: 1

Related Articles