Hello Guys,
I have two CPE 710 devices configured as an access point and client. The issue is that I cannot see the wireless signal quality on the AP device but can on the client device.
Hi @WooJoo
The speedtest result you got here is the download speed between the wireless bridge. It's different from the RX rate.
To improve the speed, please have a look at the following guidance:
Long distance wireless connection concerns when using outdoor access point
If the performance is not good, Please refer to the following articles to do some troubleshooting:
How to build a Wireless Network between home and farm using tp-link products
How to troubleshoot the CPE in AP and Client mode when the wireless speed is slow
Hi @WooJoo
What's the encryption mode you configured?
Actually, the TX rate is 886mbps, which is already the highest the device supports. No need to worry about the wireless signal.
I'm using the WPA2 with AES. Max Support speed was 800 Mbps but the speed between the AP & Client is max 250 Mpbs.
Hi @WooJoo
The speedtest result you got here is the download speed between the wireless bridge. It's different from the RX rate.
To improve the speed, please have a look at the following guidance:
Long distance wireless connection concerns when using outdoor access point
If the performance is not good, Please refer to the following articles to do some troubleshooting:
How to build a Wireless Network between home and farm using tp-link products
How to troubleshoot the CPE in AP and Client mode when the wireless speed is slow
Helpful: 0
Views: 214
Replies: 3
No one has voted for it yet.
We use cookies and browser activity to improve your experience, personalize content and ads, and analyze how our sites are used. For more details, please read our Privacy Policy.
