Setup Help - Multiple Clients and 1 or 2 AP
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
I have 3 CPE710 set as Client and 1 CPE710 setup as AP
All 3 Clients are spread out within about 60 to 75 degrees from the AP
1 Client is about 5 to 7 miles aways from AP and sees the AP but cannot connect to it
2 Clients are about 1/2 to 1 mile from AP
1 Client connects solid with no issues
1 Client keeps dropping signal
Any suggestions would be helpful
Also is there a wider angle antenna that maybe better as AP?
Thank you...
Hi, CPE is equipped with directional antenna as it is designed for point-to-point long-distance network transmission, CPE710's wireless signal is mainly focused on its front panel and has a very limited 9 degree angle, we can say that there is almost no signal on its side and back panel. So in this situation, maybe the CPE210 is a better choice.
Hi, CPE is equipped with directional antenna as it is designed for point-to-point long-distance network transmission, CPE710's wireless signal is mainly focused on its front panel and has a very limited 9 degree angle, we can say that there is almost no signal on its side and back panel. So in this situation, maybe the CPE210 is a better choice.