cannot access static IP's if device is not on the same of 4 EAP (225's)
I have four EAP225 at the latest release and level (5.1) and latest Omada SW controller.
I have a static IP wireless device (ESP32 with webserver, e.g. 192.168.1.123) that is close to one of my EAP's.
When I use my phone to access 192.168.1.123 when my phone is in range of this (same) EAP, all is fine
and I connect. When I am close to one of the other EAP's, I am not able to access my ESP32 webpage.
On my wired PC connection, I can obviously always get to my ESP32. so it looks like there is no
way if ESP32 and my smarthone are on different EAP's that I can access the webpage of the ESP.
How can I address this issue?
Thanks
Joop
Thanks.
I do not have a VLAN setup.
The ESP32 broadcasts mDNS "WallboxPlayer" and I can access such on my chrome desktop browser but
since chrome for android does not support mDNS (no android browser does), this is not an option and I need
to go through using an IP address on my smartphone.
I have made some screenshots of my Omada Software Controller.
..
In the meantime I tam pretty sure I have found the issue.
One of the EAP's ended up on a different subnet (0) iso (1). so the ESP was on a different subnet as the phone.
I made them all static in the same subnet, now all seems to wrk, fingers crossed.
Thanks.
Joop
Thanks.
I do not have a VLAN setup.
The ESP32 broadcasts mDNS "WallboxPlayer" and I can access such on my chrome desktop browser but
since chrome for android does not support mDNS (no android browser does), this is not an option and I need
to go through using an IP address on my smartphone.
I have made some screenshots of my Omada Software Controller.
..
In the meantime I tam pretty sure I have found the issue.
One of the EAP's ended up on a different subnet (0) iso (1). so the ESP was on a different subnet as the phone.
I made them all static in the same subnet, now all seems to wrk, fingers crossed.
Thanks.
Joop