DHCP server set ip range over CLI

DHCP server set ip range over CLI

DHCP server set ip range over CLI
DHCP server set ip range over CLI
2024-08-03 02:55:40 - last edited 2024-08-05 01:09:04
Model: ER605 (TL-R605)  
Hardware Version: V2
Firmware Version: 2.2.5

Hello,

 

I have a unique network configuration where I would like to write my own software to configure the IP range of several DHCP pools with separate VLANs. I was planning on doing it over SSH however I can't find a way to set the IP range of a specific DHCP pool.

  1      
  1      
#1
Options
1 Accepted Solution
Re:DHCP server set ip range over CLI-Solution
2024-08-05 01:09:00 - last edited 2024-08-05 01:09:04

Hi @Juniormunk 

Thanks for posting in our business forum.

Here's the guide:

https://static.tp-link.com/upload/manual/2023/202307/20230725/1910013378_ER605(UN)2.0_CLI.pdf

 

You might wanna start reading from this:

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update!Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
Recommended Solution
  1  
  1  
#2
Options
3 Reply
Re:DHCP server set ip range over CLI-Solution
2024-08-05 01:09:00 - last edited 2024-08-05 01:09:04

Hi @Juniormunk 

Thanks for posting in our business forum.

Here's the guide:

https://static.tp-link.com/upload/manual/2023/202307/20230725/1910013378_ER605(UN)2.0_CLI.pdf

 

You might wanna start reading from this:

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update!Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
Recommended Solution
  1  
  1  
#2
Options
Re:DHCP server set ip range over CLI
2024-08-05 15:24:51

  @Clive_A This doesn't help me any. I am looking for a way to change the available range for example I have a DHCP server for vlan 3 that has an ip-mask of 10.35.39.4 255.255.255.0 and I would like the dhcp hand out IP addresses from 10.35.39.20 to 10.35.39.200

  0  
  0  
#3
Options
Re:DHCP server set ip range over CLI
2024-08-06 01:02:32

Hi @Juniormunk 

Thanks for posting in our business forum.

Juniormunk wrote

  @Clive_A This doesn't help me any. I am looking for a way to change the available range for example I have a DHCP server for vlan 3 that has an ip-mask of 10.35.39.4 255.255.255.0 and I would like the dhcp hand out IP addresses from 10.35.39.20 to 10.35.39.200

If you need to do that, you can only do it from the web GUI.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update!Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
  1  
  1  
#4
Options