Not able to communicate two tplink switches

Not able to communicate two tplink switches

Not able to communicate two tplink switches
Not able to communicate two tplink switches
2024-05-30 06:59:27 - last edited 2024-05-31 01:04:53
Model: TL-SG3428   TL-SG3210  
Hardware Version: V3
Firmware Version: 3.20.0

I have connected the above two switches with FO using SFP module. And i am not able to ping on either side of the FO cable networks. The SFP led is not glowing on either NSs. FO cable is through by Laser test. Any configuration to be made so that i can receive the signals from the field. Help please. Subnet Mask is same for all.

  0      
  0      
#1
Options
1 Reply
Re:Not able to communicate two tplink switches
2024-05-31 01:07:48

Hi @Tholu_97 

Thanks for posting in our business forum.

If SFP is not even up, then it is a problem with layer 1. Cable, module, and physical port.

You should check each factor and rule out the possibilities.

Note that we cannot guarantee the compatibility of the SFP modules you have.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update!Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
  1  
  1  
#2
Options

Information

Helpful: 0

Views: 261

Replies: 1

Related Articles