Business Community > All Threads > ER605-V2 connected as VPN Client, but not pinging and not pingable
< All Threads

ER605-V2 connected as VPN Client, but not pinging and not pingable

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

ER605-V2 connected as VPN Client, but not pinging and not pingable

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
ER605-V2 connected as VPN Client, but not pinging and not pingable
ER605-V2 connected as VPN Client, but not pinging and not pingable
2024-04-08 06:37:13 - last edited 2024-04-12 00:45:20
Tags: #VPN #OpenVPN
Model: ER605 (TL-R605)  
Hardware Version: V2
Firmware Version: 2.2.4 Build 20240119 Rel.44368

Hello. I own the aforementioned wired router, it is set up at my parents' house.
I am trying to establish a VPN connection between it and my network for FTP and backup purposes.

 

I am running an OpenVPN server inside a docker container on TrueNAS machine which is at my place, and the client connection is made from the router. I know the connection is made from the following:

 

This is what my clientside config looks like, the problem could be with "local IP" field. I did not know what to write in there so I tried 10.0.0.0/24 (subnet of the docker host machine) and 10.8.0.0/24 (subnet that VPN creates) too. I am hiding the remote server address for obvious reasons, but it's set to public ip of docker host.

 

Even though there is data being exchanged, none of the following works:

ping 10.0.0.1 (Router of docker host) from ER605

ping 10.8.0.1 (OpenVPN) from ER605

ping 10.8.0.6 (ER605 Client address) from Docker container

ping 10.8.0.10 (my laptop connected to the same vpn server) from ER605 (10.8.0.6) and vice-versa

 

When I create the same setup using my laptop (10.8.0.10) all of the above works, server and laptop ping each other, but neither of them can ping or can be pinged from the tp-link client.

 

Any input will be appreciated

  0      
 
  0      
 
#1
Options
2 Accepted Solutions
Re:ER605-V2 connected as VPN Client, but not pinging and not pingable-Solution
2024-04-11 05:47:35 - last edited 2024-04-12 00:45:25

Hi @bedro 

Thanks for posting in our business forum.

bedro wrote

Hello. 192.168.64.0/24 is the physical LAN network of ER605 router, as opposed to 10.8.0.0/24 which is assigned by openvpn. Yes I am trying to create a LAN-to-LAN network.

Hope this is helpful.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
Recommended Solution
  1  
  1  
#4
Options
Re:ER605-V2 connected as VPN Client, but not pinging and not pingable-Solution
2024-04-12 00:14:40 - last edited 2024-04-12 00:45:20

  @Clive_A First of all, thanks for making the guide just for my current case. Unfortunately, it seems like I am doing everything according to the guide (except two way link, which I do not need).

I got a root access to the ER605 device to debug. I even tried running openvpn3 --config client.ovpn

with commandline, but still no connection.

 

I found the solution, before I finished typing this reply. I solved it by adding two routes via root commandline on ER605.

 

dest: 10.0.0.0 netmask: 255.255.255.0 gateway: 10.8.0.6

dest: 10.8.0.1 netmask: 255.255.255.255 gateway: 10.8.0.6

I don't know if I tried this before, but it worked this time. I guess you can close the thread now. Just let me know, can I reopen it if there are any more issues? Thanks again.

Recommended Solution
  1  
  1  
#5
Options
5 Reply
Re:ER605-V2 connected as VPN Client, but not pinging and not pingable
2024-04-09 03:00:16

Hi @bedro 

Thanks for posting in our business forum.

What is this subnet?

 

Are you trying to create a LAN-to-LAN network?

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
  0  
  0  
#2
Options
Re:ER605-V2 connected as VPN Client, but not pinging and not pingable
2024-04-10 19:33:01
Hello. 192.168.64.0/24 is the physical LAN network of ER605 router, as opposed to 10.8.0.0/24 which is assigned by openvpn. Yes I am trying to create a LAN-to-LAN network.
  1  
  1  
#3
Options
Re:ER605-V2 connected as VPN Client, but not pinging and not pingable-Solution
2024-04-11 05:47:35 - last edited 2024-04-12 00:45:25

Hi @bedro 

Thanks for posting in our business forum.

bedro wrote

Hello. 192.168.64.0/24 is the physical LAN network of ER605 router, as opposed to 10.8.0.0/24 which is assigned by openvpn. Yes I am trying to create a LAN-to-LAN network.

Hope this is helpful.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
Recommended Solution
  1  
  1  
#4
Options
Re:ER605-V2 connected as VPN Client, but not pinging and not pingable-Solution
2024-04-12 00:14:40 - last edited 2024-04-12 00:45:20

  @Clive_A First of all, thanks for making the guide just for my current case. Unfortunately, it seems like I am doing everything according to the guide (except two way link, which I do not need).

I got a root access to the ER605 device to debug. I even tried running openvpn3 --config client.ovpn

with commandline, but still no connection.

 

I found the solution, before I finished typing this reply. I solved it by adding two routes via root commandline on ER605.

 

dest: 10.0.0.0 netmask: 255.255.255.0 gateway: 10.8.0.6

dest: 10.8.0.1 netmask: 255.255.255.255 gateway: 10.8.0.6

I don't know if I tried this before, but it worked this time. I guess you can close the thread now. Just let me know, can I reopen it if there are any more issues? Thanks again.

Recommended Solution
  1  
  1  
#5
Options
Re:ER605-V2 connected as VPN Client, but not pinging and not pingable
2024-04-12 00:45:14

Hi @bedro 

Thanks for posting in our business forum.

bedro wrote

  @Clive_A First of all, thanks for making the guide just for my current case. Unfortunately, it seems like I am doing everything according to the guide (except two way link, which I do not need).

I got a root access to the ER605 device to debug. I even tried running openvpn3 --config client.ovpn

with commandline, but still no connection.

 

I found the solution, before I finished typing this reply. I solved it by adding two routes via root commandline on ER605.

 

dest: 10.0.0.0 netmask: 255.255.255.0 gateway: 10.8.0.6

dest: 10.8.0.1 netmask: 255.255.255.255 gateway: 10.8.0.6

I don't know if I tried this before, but it worked this time. I guess you can close the thread now. Just let me know, can I reopen it if there are any more issues? Thanks again.

1. Any questions about the debug mode are not answered. Debug mode is not open to the users and we don't provide any guidelines on howto enter it or what commands you should use. Debug mode is for the dev team only so far when we are in a remote session. We have not publicized anything about this part particularly.

 

Warning to anyone, anything you do in the debug mode may be damaging to the system if you don't know what you are doing. If there is a misconfig leading to the brick situation, please recover based on the FAQ. We do not offer help on recovering your missing parameters or config in debug mode.

 

2. I tried without adding anything on the ER605 but what's been configured in that guide? So, I'd say that it would work without anything special. Just a regular OpenVPN setup.

3. No. If you have new questions, open a new public thread and it is open for anyone to discuss. Not just me.

If you have a question just for the support, please contact the technical support instead.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
  2  
  2  
#6
Options

Information

Helpful: 0

Views: 793

Replies: 5

Tags

VPN OpenVPN
Related Articles
ER605 V2 VPN Client-to-Site with OpenVPN Extremely Slow
179 0
Trouble with OpenVPN ER605 Stand Alone - No Internet Access and No Pinging
212 0
ER605 show clients connected to OpenVPN server
198 0
ER605 VPN client
1698 0
VPN IPSEC IKEv2 on er605 v2
2332 0
ER605 v2 - VPN client/server no Username and Password
499 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.