Replace OC200 with the controller built in to the ER8411

Replace OC200 with the controller built in to the ER8411

Replace OC200 with the controller built in to the ER8411
Replace OC200 with the controller built in to the ER8411
2024-02-29 01:04:20
Model: OC200  
Hardware Version: V1
Firmware Version: 1.8.2 build 200240110 rel 78776

I have a oc200 controller that is in place, I swapped out the er605 for a er8411 with the controller built in, how do i move the controller database and programming to the er8411 controller from the oc200

  0      
  0      
#1
Options
3 Reply
Re:Replace OC200 with the controller built in to the ER8411
2024-02-29 03:02:03

Hi @DeonD,

 

No, the migrate configuration can only be done between Controllers, not between Controllers and Standalone devices. So you can't migrate settings from Omada controller to ER8411, only re-configuring is the solution.

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*
  0  
  0  
#2
Options
Re:Replace OC200 with the controller built in to the ER8411
2024-07-30 00:15:35
ER8411 has built in omada controller like ER7212PC?
  0  
  0  
#3
Options
Re:Replace OC200 with the controller built in to the ER8411
2024-07-30 07:39:38 - last edited 2024-07-30 07:40:27

  @Morris211 ER8411 does not have a built-in Controller.It has to be managed by other Controller.

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*
  0  
  0  
#4
Options

Information

Helpful: 0

Views: 492

Replies: 3

Related Articles