Configuration Wireguard

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Configuration Wireguard

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Configuration Wireguard
Configuration Wireguard
2024-02-12 11:09:19 - last edited 2024-02-18 02:41:04
Model: ER605 (TL-R605)  
Hardware Version: V2
Firmware Version: 2.2.4
Good morning

I would like to set up a VPN ,
my choice is wireguard due to its speed and ease of setting up
but I have some traffic problems
I still have 0 kb/s received!!

 

Bonjour

J'aimerais mettre en place un VPN .mon choix c'est porter sur wireguard par sa  rapidité et facilité de mise en place

mais j'ai quelque soucis de traffic 

J'ai toujour 0 ko/s recu !!

 

 

Configuration client

 

[Interface]

PrivateKey = WPg***************************************************

Address = 192.168.10.11/24

DNS = 8.8.8.8

 

[Peer]

PublicKey = YzoTQ************************************************

AllowedIPs = 0.0.0.0/0

Endpoint = 82.xxx.xxx.xxx:51820

 

 

OMADA config


 

There I must have made a mistake but I don't see where, sorry for my English

Thank for all
Best regard

 

 

  0      
  0      
#1
Options
1 Accepted Solution
Re:Configuration Wireguard-Solution
2024-02-18 02:40:50 - last edited 2024-02-18 02:40:56

Hi @Fabfab74 

Thanks for posting in our business forum.

You might find this article helpful.

 

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update!Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
Recommended Solution
  0  
  0  
#2
Options
1 Reply
Re:Configuration Wireguard-Solution
2024-02-18 02:40:50 - last edited 2024-02-18 02:40:56

Hi @Fabfab74 

Thanks for posting in our business forum.

You might find this article helpful.

 

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update!Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
Recommended Solution
  0  
  0  
#2
Options

Information

Helpful: 0

Views: 543

Replies: 1

Related Articles