Removing LAG leaves ports unusable
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hi.
I have configured 3 LACP teams via Omada Software controller on an SG3428X v1. Now, I removed team 2. Team 1 and 3 continue to work properly, but the former ports of team 2 are now unusable. Disabling/enabling works but the ports are not forwarding anything regardless of their configuration.
- I tried to operate them as standard ports with the same or different VLANs / PVID with no use.
- I also tried to build a new LAG team with these ports using the old team number 2. Interestingly, the controller remembered the old team name, so I guess, the configuration has not been entirely deleted on the switch which now causes the trouble.
- I then tried to build a new LAG team with the old ports but team number 4. Didn't work either.
Can someone confirm the problem or has similar issues or a workaround? Unfortunately, the switch is part of a production environment, so I cannot risk losing more ports or LAG 3 by deleting it, too, for simple testing.
Thanks.
Omada Software controller is 5.13.22 on Debian.
Switch firmware is 1.30.0
Martin
