Business Community > All Threads > Change ER605v2 Omada Controller IP to Another IP without Resetting it.
< All Threads

Change ER605v2 Omada Controller IP to Another IP without Resetting it.

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Change ER605v2 Omada Controller IP to Another IP without Resetting it.

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Change ER605v2 Omada Controller IP to Another IP without Resetting it.
Change ER605v2 Omada Controller IP to Another IP without Resetting it.
2024-01-10 17:30:06 - last edited 2024-01-11 19:47:19
Model: ER605 (TL-R605)  
Hardware Version: V2
Firmware Version: 2.2.3

I have several remote ER605 v2 routers pointed to my Omada Controller using a static public IP.

 

I have to get a new ISP so I will need to change the static public IP of the Omada Controller.

 

Is there a way to change the IP that the router has set for the Omada Controller without resetting the TP-Link if it is already managed by a controller? 

 

Thanks,

  1      
 
  1      
 
#1
Options
1 Accepted Solution
Re:Change ER605v2 Omada Controller IP to Another IP without Resetting it.-Solution
2024-01-11 19:32:28 - last edited 2024-01-11 19:47:19

  @MugiwaraWorker 

 

I think the easiest/safest way is to do a controller migration, ie spin up a new controller, migrate the config, then migrate the devices.  It won't be seamless, but the interruption should be in the order of a few outages of a few minutes each as devices get reprovisioned in their new virtual home.

 

Have a look here (image below is from p.13) as that's how you 'change' the controller from an IP to a URL remotely:  

https://static.tp-link.com/2019/201910/20191023/managing_the_omada_controller.pdf?configurationId=18625

 

<< Paying it forward, one juicy problem at a time... >>
Recommended Solution
  0  
  0  
#6
Options
6 Reply
Re:Change ER605v2 Omada Controller IP to Another IP without Resetting it.
2024-01-11 01:18:18

Hi @MugiwaraWorker 

Thanks for posting in our business forum.

Use the discovery utility to assign the new IP and let it adopt them again.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
  0  
  0  
#2
Options
Re:Change ER605v2 Omada Controller IP to Another IP without Resetting it.
2024-01-11 10:25:19

  @MugiwaraWorker 

 

Since the devices in question appear to be remote to the controller, I have found it easiest to change the controller URL on the remote devices to use a dynamic DNS name rather than a numerical IP in order to find and be managed by an offsite controller via the internet.

<< Paying it forward, one juicy problem at a time... >>
  0  
  0  
#3
Options
Re:Change ER605v2 Omada Controller IP to Another IP without Resetting it.
2024-01-11 17:54:45

  @Clive_A 

 

Does the Discovery utility work for Routers? I thought it was only for EAPs.

 

I don't have any devices in these remote locations where I could download and install the Omada Discovery Utility. From my understanding the Omada Discovery Utility can't be used over WAN.

 

I could be mistaken though.

 

Thanks.

  0  
  0  
#4
Options
Re:Change ER605v2 Omada Controller IP to Another IP without Resetting it.
2024-01-11 17:59:39

  @d0ugmac1 

 

I agree. I am planning to do dynamic DNS when I re-configure the TP-Links so I don't have this issue come up again

 

Is there any way to change the controller setting on the router from an IP to a domain without resetting the router.

 

Thanks.

  0  
  0  
#5
Options
Re:Change ER605v2 Omada Controller IP to Another IP without Resetting it.-Solution
2024-01-11 19:32:28 - last edited 2024-01-11 19:47:19

  @MugiwaraWorker 

 

I think the easiest/safest way is to do a controller migration, ie spin up a new controller, migrate the config, then migrate the devices.  It won't be seamless, but the interruption should be in the order of a few outages of a few minutes each as devices get reprovisioned in their new virtual home.

 

Have a look here (image below is from p.13) as that's how you 'change' the controller from an IP to a URL remotely:  

https://static.tp-link.com/2019/201910/20191023/managing_the_omada_controller.pdf?configurationId=18625

 

<< Paying it forward, one juicy problem at a time... >>
Recommended Solution
  0  
  0  
#6
Options
Re:Change ER605v2 Omada Controller IP to Another IP without Resetting it.
2024-01-11 19:47:15

  @d0ugmac1 

 

That looks like it will work for my situation.

 

I am going to try that and see how it goes.

 

Thanks!

  0  
  0  
#7
Options

Information

Helpful: 1

Views: 1224

Replies: 6

Related Articles
how to change IP address of ER605 after adopted by omada controller :
520 0
Change IP/Subnet ER605
460 0
ER605v2 Disconnect from controller regulary
3622 0
ER605v2 router using Omada Controller is not connecting to External Wireguard Server
587 0
Change IP address of Software Controller
1012 0
ER605v2 connect always again to controller OC200
819 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.